13 Port Gigabit Power-over-Ethernet Extender
Description:
Ethernetand PoE connections both restrict cable distances to 100meters between networkports. To overcome this distance limit, network installers can simply connectan PoE Extender in-line with the Cat-5e or Cat-6 cable.
WithGigabit PoE Extender, PDs (such as IP Security Cameras, VoIP telephones,wireless access points) can be installed at greater distances than 100 metersfrom one another. By connecting PoE Extender for every extra 100 meters ofcable, both Ethernet and PoE can be extended to 200 meters, depending on PD'spower required and power source.
GigabitPoE Extender does not require any additional power supply and the connected PDis fed by an single PoE switch or mid-span, which simplifies installation PoEExtender offers 13 Ethernet ports, which are both configured automatical forlink speed, duplex and crossover and the full-rate network throughput ismain-tained. PoE in connection PoE Switch, 12.36 or 45.78 powered support,support IEEE802.3af/at/bt the power supply, PoE out for the supply terminal 12 Gigabit, PoE total power can reach 80w MAX [PoE Switch or PoE Injector need toprovide IEEE802.3bt 4Pairs (80W MAX) power.
Features
Compatible withIEEE802.3af and IEEE802.3at and IEEE802.3bt (PoE in)
Extends the range ofPoE and Ethernet an additional 100 meters
No additional powersupply is required
Automaticallydetects and protects PoE equipment from being damaged by incorrect installation
Full-rate networkthroughout the whole extended distance
Desktop-mount andwall-mount design
Easy plug-and-playinstallation
Line speedforwarding
Lightning protection: 4KV
Specifications:
Item | Description |
No. of channels | No. of channels |
Pass Through Data Rates | 10/100/1000 Mbps half/full duplex |
Power over Ethernet input | Pin Assignment and Polarity: Both 1/2 (+), 3/6 (-) and 7/8 (-), 4/5 (+) |
Power over Ethernet Output | Pin Assignment and Polarity: 1/2 (-), 3/6 (+) Output Power: up to 71W for 12 PSE |
Indicators | LED indicators are located on the RJ45 connector Power indicator: PoE enabled Powered success: Power Network indicator: Link/Act |
Connectors | Shielded RJ-45, EIA 568A and 568B |
Network cables | Shielded category 5 (or higher) |
Dimensions | 130mm x 110mm x 44mm |
Mounting | Wall of shelf |
Environment | Indoor |
Environmental Conditions | Operating Ambient Temperature: 0 to 40 ℃ Operating Humidity: Maximum 90%, Non-condensing Storage Temperature: -20 to 60℃ Storage Humidity: Maximum 95%, Non-condensing |
Regulatory Compliance | IEEE802.3af (15.4W) , IEEE 802.3at (30W) , IEEE802.3bt (90W) |